Play Audio Through Bluetooth - Philips NTX600 User Manual

Note
•
Shuffle play cannot be selected when you play the
programmed tracks.
Program tracks
You can program a maximum of 20 tracks.
1
In Disc or USB A mode, press
playing.
2
Press PROG to activate the program
mode.
» A number flashes on the screen.
3
For MP3 tracks, press ALB/PRESET+/- to
select an album.
4
Press or to select a track number,
then press PROG to confirm selection.
5
Repeat steps 3 to 4 to program other tracks.
6
Press to play the programmed track.
• To erase the program, press
Note
•
The function is not available in USB B mode.

Play audio through Bluetooth

The product can stream music from your
Bluetooth device to the system through
Bluetooth.
Connect a device
Note
•
Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
The operational range between this product and a
Bluetooth device is approximately 10 meters (30 feet).
•
Any obstacle between this product and a Bluetooth
device can reduce the operational range. Keep away
from any other electronic device that may cause
interference.
EN
12
Option 1: Connect a device through
NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
to stop
connect it with this speaker easily.
1
2
3
twice.
4
Option 2: Connect a device manually
1
2
3
Enable NFC on your Bluetooth device
(refer to its user manual).
Press Bluetooth to select BT source.
» [BT] (BT) is displayed, then [SEARCH]
(search) begins to flash.
» The Bluetooth indicator flashes.
Tap the NFC tag on the top of the product
with the NFC area of your Bluetooth
device.
Follow the on-screen instructions to
complete the pairing and connection.
» After successful connection, the
Bluetooth indicator turns solid blue.
Slide CROSS FADER to the far left.
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (see the user manual of
the device).
Press Bluetooth repeatedly to select BT
source.
» [BT] (BT) is displayed, then [SEARCH]
(search) begins to flash.
» The Bluetooth indicator flashes.