D-Link DCS-4622 User Manual page 26

Section 3: Configuration
Enable Enabling this setting allows the camera to add port forwarding entries to
UPnP Port
the router automatically on a UPnP capable network. If you enable this
Forwarding: setting, enter the Forwarding Port to use.
Enable PPPoE: Enable this setting if your network uses PPPoE.
User Name / Enter the username and password for your PPPoE account. Re-enter your
Password:
password in the Confirm Password field. You may obtain this information
from your ISP.
HTTP Port: The default port number is 80.
Access Name The default name is video#.mjpg, where # is the number of the stream.
for Stream 1/2:
HTTPS Port: You may use a PC with a secure browser to connect to the HTTPS port of
the camera. The default port number is 443.
Authentication: Choose to enable or disable RTSP digest encryption. Digest encryption
uses MD5 hashes.
RTSP Port: The port number that you use for RTSP streaming to mobile devices, such
as mobile phones or PDAs. The default port number is 554.
Access Name You may specify the address of a particular stream. For instance, live1.sdp
for Stream 1/2: can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents
the IP address of your camera.
Enable CoS: Enabling the Class of Service setting implements a best-effort policy to
prioritize traffic without making any bandwidth reservations.
Enable QoS: Enabling QoS allows you to specify a traffic priority policy to ensure a
consistent Quality of Service during busy periods. If the Network Camera is
connected to a router that itself implements QoS, the router's settings will
override the QoS settings of the camera.
D-Link DCS-4622 User Manual 26