Battery Installation/Battery Charge - Panasonic KX-TG2382B Operating Instructions Manual

Battery Installation/Battery Charge

I Battery installation
1 Install the battery in the handset.
2 Close the handset cover.
I Battery charge
To power the handset, charge the battery.
Place the handset on the base unit or the charger for about 15 hours before
initial use.
I Recharge
Recharge the battery when:
–"Recharge" is displayed,
–" " flashes on the display, or
– the handset beeps every minute while it is in use.
• Clean the handset and the base unit charge contacts with a soft, dry
cloth once a month. Clean more often if the unit is subject to grease,
dust or high humidity. If not, the battery may not charge properly.
• If the battery is fully charged, you do not have to place the handset on the
base unit or the charger until "Recharge" is displayed and/or "
flashes. This will maximize the battery life.
• The battery cannot be overcharged.
A nickel metal hydride battery that is recyclable powers the
product you have purchased. Please call 1-800-8-BATTERY
for information on how to recycle this battery.
–5–
"