Epson XP-340 User Manual page 177

LCD code Condition/solution
I-31 To make wireless connection settings from your computer, install the product
software on your computer and follow the on-screen instructions.
I-41 The Paper Configuration setting is disabled. To use AirPrint, enable the Paper
Configuration setting.
I-60 Your computer may not support WSD (Web Services for Devices). The Scan to
PC (WSD) function is available only for computers running English versions of
Windows 10, Windows 8.x, Windows 7, or Windows Vista.
I-71 Place an original on the scanner glass to use the selected copy layout option.
Recovery mode An error has occurred during firmware updating. Connect your product using a
USB cable and try updating the firmware again. If you still receive this error
message, contact Epson for support.
Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages.
During the life of your product it may reach a condition where either satisfactory print quality cannot be
maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your
LCD screen, or lights on the control panel will advise you when these parts need replacing. If this
happens during the standard warranty of the product, the exchange of the product or replacement of the
pads is covered under the standard warranty. If the product is out of warranty, the pads can be replaced
by any Epson authorized service provider. The waste ink pads are not a user-replaceable part.
Parent topic: Solving Problems
Related references
Paper Jam Problems
Where to Get Help
Related tasks
Using AirPrint
Placing Originals on the Scanner Glass
Related topics
Loading Paper
Replacing Ink Cartridges
Wi-Fi Networking
177