Table of Contents
Advertisement
FLOW CHART NO.10
PON 5V is not outputted. (PON 12V is possible.)
Is 5V voltage supplied at collector of Q1004?
Is voltage of 5V sent out from the collector of
Q1004?
Check the Q1004 periphery circuit.
Is the "H" pulse inputted into the base of Q1004?
Replace Q1004.
FLOW CHART NO.11
EV -19V is not outputted.
Is -19V voltage supplied at the cathode of D1003?
Is voltage of -24V sent out from the anode of
D1003?
Check the D1003 periphery circuit.
Replace D1003.
FLOW CHART NO.12
PON 3.3V(1), (2) is not outputted.
Is 4V voltage supplied at emitter of Q1011?
Is voltage of 3.3V sent out from collector of Q1011?
Check the Q1011 periphery circuit.
Does the P-CON switch circuit operate normally?
(Q1005, Q1006, etc.)
Are the "H" pulse inputted into base of Q1011?
Replace Q1011.
Yes
No
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
No
Check the AT 5V line.
Yes
Check for load circuit short-circuiting or leak.
No
Check or replace Q1004, D1046.
No
Check the AT -24V line.
Yes
Check for load circuit short-circuiting or leak.
No
Check the secondary circuit, AT 4V line.
Yes
Check for load circuit short-circuiting or leak.
No
Check each component and if poor the replace.
No
Check or replace Q1005, Q1006, Q1049.
1-8-4
Advertisement
Table of Contents
