Table of Contents
Advertisement
3 Installation
Important
Before the installation, please make sure the installation surface can sustain at
least 3X weight of the bracket and the camera.
Step 1
Take out the camera cable through cable exit of the bracket chassis and install camera
bracket. If it is cement wall, you need to install expansion bolt first (the installation hole of
expansion bolt need to be in accordance with the bracket), then use self-tapping bolt to
install bracket, which is shown in Figure 3-1.
If it is wooden wall, you can skip the first step and use self-tapping bolt to install bracket
directly.
Step 2
Unscrew the M3×20 and M3×5 screws on the bracket in the direction shown in Figure 3-2,
adjust the camera to an exact location which needs to be monitored by rotating the bracket
and camera body, then secure the bolts.
Figure 3-1
5
Advertisement
Table of Contents
