Manual Pairing; Auto Reconnect; Volume Control; Calling - LG HBM-570 User Manual

How to use
Using your handset, find the Bluetooth Menu and "search for" or
"add" new devices.
Select "LG HBM-570" from the list of devices and pair it with your handset.
When asked for the Pass/PIN code during the pairing procedure,
please enter "0000" (4 Zeros).
Once pairing has completed successfully, you will hear a beep.
(Speech: Pairing Successful to Phone)
After pairing successfully, be sure to "Connect" to the LG HBM-570.
(Speech: Connected to Phone)
If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.
If the Headset is in Pairing mode for three minutes without being
connected to a handset, the HBM-570 will automatically turn off.

2) Manual Pairing

With the Power off, press and hold the PWR button for 6 seconds.
When the Headset enters Pairing Mode, the LED indicator will show
a solid blue light.
Using your handset, find the Bluetooth Menu and "search for" or
"add" new devices.
Select "LG HBM-570" from the list of devices and pair it with your handset.
When asked for the Pass/Pin code during the pairing procedure,
please enter "0000" (4 Zeros)
Once pairing has completed successfully, you will hear a beep.
(Speech: Pairing Successful to Phone)
After pairing successfully, be sure to "Connect" to the LG HBM-570.
(Speech: Connected to Phone)
If you want to pair with a different device in the future, the Headset
must be placed in Pairing Mode.
If the Headset is in Pairing mode for three minutes without being
connected to a handset, the HBM-570 will automatically turn off.

Auto Reconnect

- When the HBM - 570 turns off (accidentally or intentionally) while
connected to a handset, the Headset and handset will disconnect.
The Headset and handset will automatically reconnect when the
HBM- 570 is turned back on.(as long as both devices are within
the required range of 33ft. or 10m).
6
[ Out of range ]
- When the HBM - 570 and your handset are separated by a distance of
33 feet (10 meters) or more, the Headset and handset will disconnect,
and you will hear a beep(Speech: Out of range)
When the handset and HBM - 570 are brought back within the required
distance, the HBM - 570 will automatically reconnect with the handset,
and you will hear a beep (Speech: Connected to Phone)
- If the Headset and handset do not automatically reconnect when they
are back within the required range, briefly press the CALL button on
the HBM-570 to reconnect manually.

Volume control

- Press the VOLUME UP or VOLUME DOWN button to adjust the
speaker volume.
- There are eight levels of speaker volume.

Calling

Answering a call

- When there is an incoming call, the Headset will ring.
(Speech: Call from [caller name or phone numbers])
- Briefly press the CALL button to answer an incoming call.

Making a call

- If you make a call from the handset, the call will (subject to phone settings)
automatically transfer to the Headset. If the call is not automatically
transferred, you can manually transfer the call by briefly pressing the
CALL button on the HBM - 570 (Headset and handset must be paired).

Voice dialing*

- Briefly press the CALL button to activate "Voice Command". You will get
the best results if you record the voice dialing tag through your Headset.
NOTE: If the handset does not support Voice Dialing, it is possible
that performing this action will activate Last Number redial.

Last number redial*

- Press and hold the CALL button for 1 second to activate "Last Number
Redial". The Headset will beep, and call the last number dialed.

Ending a call

- Briefly press the CALL button.
How to use
7