D-Link DGS-1510-10L/ME Hardware Installation Manual page 43

DGS-1510/ME Series Metro Ethernet Switch Hardware Installation Guide
Feature
Maximum Power Consumption
Standby Power Consumption
Optional RPS
Security Lock
Real Time Clock (RTC)
Reset Pinhole
Temperature
Humidity
Dimensions
Description
listed below:
DGS-1510-10L/ME: Fanless
DGS-1510-20L/ME: Fanless
DGS-1510-28L/ME: Fanless
DGS-1510-28LP/ME: 2 Fans
DGS-1510-28X/ME: 1 Fan
DGS-1510-28XMP/ME: 2 Fans
DGS-1510-28XS/ME: 2 Fans
DGS-1510-52L/ME: 2 Fans
DGS-1510-52X/ME: 2 Fans
DGS-1510-10L/ME: 13.0 Watts (100V), 13.6 Watts (240V)
DGS-1510-20L/ME: 15.3 Watts (100V), 15.6 Watts (240V)
DGS-1510-28L/ME: 17.5 Watts (100V), 17.6 Watts (240V)
DGS-1510-28LP/ME: PoE off: 28.4 Watts (100V), 26.7 Watts (240V)
PoE on: 246.5 Watts (100V), 233.5 Watts (240V)
DGS-1510-28X/ME: 21.4 Watts (100V), 22.1 Watts (240V)
DGS-1510-28XMP/ME: PoE off: 30.9 Watts (100V), 31.8 Watts (240V)
DGS-1510-28XS/ME: 53.38 Watts (100V), 52.68 Watts (240V)
DGS-1510-52L/ME: 39 Watts (100V), 37.1 Watts (240V)
DGS-1510-52X/ME: 42.8 Watts (100V), 42 Watts (240V)
DGS-1510-10L/ME: 9.4 Watts (100V), 9.6 Watts (240V)
DGS-1510-20L/ME: 9.8 Watts (100V), 10.5 Watts (240V)
DGS-1510-28L/ME: 10.1 Watts (100V), 10.6 Watts (240V)
DGS-1510-28LP/ME: 19.5 Watts (100V), 19.0 Watts (240V)
DGS-1510-28X/ME: 13.2 Watts (100V), 15.2 Watts (240V)
DGS-1510-28XMP/ME: 19.8 Watts (100V), 20.4 Watts (240V)
DGS-1510-28XS/ME: 13.0 Watts (100V), 13.5 Watts (240V)
DGS-1510-52L/ME: 22.7 Watts (100V), 22.8 Watts (240V)
DGS-1510-52X/ME: 29.3 Watts (100V), 29.2 Watts (240V)
Provides one connector in rear panel to install optional external RPS to
enhance the reliability. When the internal power fails, the optional
external RPS will take over all the power immediately and automatically.
Provides a Kensington-compatible security lock, on the rear of the
Switch, to be able to connect to a secure immovable device. Insert the
lock into the notch and turn the key to secure the lock. The lock-and-
cable apparatus should be purchased separately.
Be able to maintain the time setting when the device power is off.
A factory reset pinhole on the front panel of the Switch. After pressing
hardware reset button for 5 seconds, the switch will reset to the factory
default configuration.
Operating: -5°C ~ 50°C (23°F ~ 122°F)
Storage: -20°C ~ 70°C (-4°F ~ 158°F)
Operating: 0% ~ 95% (non-condensing)
Storage: 0% ~ 95% (non-condensing)
DGS-1510-10L/ME: 280mm (W) x 140mm (D) x 44mm (H)
DGS-1510-20L/ME: 280mm (W) 140mm (D) 44mm (H)
DGS-1510-28L/ME: 440mm (W) 210mm (D) 44mm (H)
DGS-1510-28LP/ME: 440mm (W) 210mm (D) 44mm (H)
DGS-1510-28X/ME: 440mm (W) 210mm (D) 44mm (H)
38
PoE on: 445.2 Watts (100V), 425.1 Watts (240V)