D-Link DCS-1000W Quick Installation Manual page 6

Running the Setup Wizard (continued)
Input the correct settings for your
camera into the IP Address and
Subnet Mask fields. Remember that
these settings must correspond with
your network settings.
Click Next
The Connection Mode depends on how
your camera is connected to your
network. Click Infrastructure for use with
a router or Adhoc for peer-to-peer. The
Network Name, Wireless Channel, and
Encryption Keys MUST correspond with
your wireless network settings.
Click Next
If you need to make any changes,
click Back to modify your camera
settings. Otherwise, click Restart to
save your settings.
Click Restart
Your setup is now complete! When
the main Setup Wizard screen appears
after clicking Restart, you are ready to
view your camera's images. Click
Link to automatically launch your web
browser and view your images.
Click Link
6