Using The Supplied Wireless Controller Or An Optional Remote Controller - Canon VIXIA GX10 Instruction Manual

Zooming
To use high-speed zoom in standby mode
When high-speed zoom is activated and [v Camera Setup] > [Zoom Rocker Zoom Speed] is set to [Y]
(variable zoom speed), in record standby mode you will be able to zoom at the highest speed available
([Z Fast]). Nevertheless, the zoom speed while recording will be determined by the [Zoom Speed Level]
54
setting.
1 Select [High-Speed Zoom].
> [v ! Camera Setup] > [High-Speed Zoom]
2 Touch [i On] and then touch [X].
NOTES NOTES
• When pre-recording is activated, the zoom speed will be determined by the [Zoom Speed Level] setting even
in record standby mode.

Using the Supplied Wireless Controller or an Optional Remote Controller

The zoom speeds when using the supplied wireless controller, the optional RC-V100 Remote Controller or a
commercially available remote control connected to the REMOTE terminal are different.
You can also zoom remotely using Browser Remote on a connected network device (A 111, 117).
Zoom speeds for remote operation
Accessory
Wireless controller (supplied)
RC-V100 Remote Controller
(optional)
Commercially available remote
controls
Wireless controller: Approximate zoom speeds (time required to zoom end-to-end)
[Wireless Ctrlr Zoom Speed]
setting
1 (slowest)
16 (fastest)
* When the zoom speed is too fast, the camcorder may have more trouble focusing automatically while zooming.
1 Select the overall zoom speed level (step 1, A 53).
2 Select [Wireless Ctrlr Zoom Speed].
3 Touch [Ï] or [Ð], or drag your finger along the adjustment bar, to set the desired constant speed.
4 Touch [X].
NOTES NOTES
• When an optional RC-V100 Remote Controller is connected to the camcorder, you can zoom with the remote
controller's ZOOM dial. At default settings, turn the dial right to zoom in (S) and left to zoom out (T).
Constant zoom speed. See the following table.
Variable speed: The greater the angle at which the RC-V100's ZOOM dial is rotated from the center, the
faster the zoom.
If the remote control does not support variable zoom: Constant zoom speed.
If the remote control supports variable zoom: Variable zoom according to the remote control's settings.
[Zoom Speed Level] setting
[] Slow] [[ Normal]
4 min. 38 sec. 2 min.
4.2 sec. 2.6 sec.
Zoom speed
[Z Fast]*
1 min.
1.5 sec.