High-density Drive Enclosures
1.
Attach the rack rails to the rack.
The size of a high-density drive enclosure is 4U.
2.
Install the stopper brackets (for the left and right sides) in the front, and then install the flap brackets in
the rear.
●
Rack pillar: front
Rack rail
Stopper bracket
(left)
(left)
M5 screw
(Rack pillar: front)
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide
M5 screw
Rack rail
(right)
Stopper bracket
(right)
4
Copyright 2017 FUJITSU LIMITED
●
Rack pillar: rear
Rack rail
(right)
Flap bracket B
M4 screw
Flap bracket A
(Rack pillar: rear)
Rack rail
(left)
P3AM-7852-06ENZ0