Parts And Functions; Control Panel - Philips Signage Solutions Q-Line 55BDL3050Q User Manual

2.

Parts and Functions

2.1.

Control Panel

9
[ ] button
1
Use this button to turn the display on or put the display to standby.
[MUTE] button
2
Switch the audio mute ON/OFF.
[INPUT] button
3
Choose the input source.
[ ] button
4
• Increase the volume
• Enter into submenu while OSD menu is on
[ ] button
5
• Decrease the volume
• Back to previous menu while OSD menu is on
[ ] button
6
• Move the highlight bar up to adjust the selected item while
OSD menu is on
• Increase the adjustment while adjust value.
[ ] button
7
• Move the highlight bar down to adjust the selected item while
OSD menu is on.
• Decrease the adjustment while adjust value.
[MENU] button
8
Return to previous menu while OSD menu is on, or to activate the
OSD menu when OSD menu is off.
MUTE INPUT MENU
1 2 3 4 5 6 7 8
Remote control sensor and power status indicator
9
• Receives command signals from the remote control.
• Indicates the operating status of the display without OPS:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- When {SCHEDULE} is enabled, the light blinks green and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned off
* Using IR sensor cable for better remote control performance.
(Please refer to the instructions of 3.5)
3
55BDL3050Q