Existing Network > New Network
�������� �������
��������� �����
��� �������
��������� �����
������
Xbox
������
�
������ ������
������ ������
�
Users
®
2
Connect the Ethernet cable from your Xbox
to your D-Link Gaming Adapter.
3
Start your Xbox
and run the network setup
®
wizard to complete your installation.
© 2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. Version 1.0 Revised 12/13/2004
Hardware Installation
1
Connect the power adapter to your D-Link
Gaming Adapter and to a power outlet.
Other Game Console Users
2
Connect an Ethernet cable from a computer
®
to your D-Link Gaming Adapter.
Open your Web browser and enter http://192.168.0.30 in the Address field.
3
Hit Enter and the D-Link Gaming Adapter web-based management interface
will appear. Run the Setup Wizard to configure your Gaming Adapter.
4
Disconnect the Ethernet cable from the computer and connect it to your
gaming console.
Installation is complete. For additional information and troubleshooting
tips, please refer to the User Manual on the CD-ROM.