Error Message - JVC LT-26DE1BJ Instructions Manual

APPenDiX

error Message

Error message Possible causes
The aerial is not pointing properly.
no or Bad Signal
The channel has a signal, but no audio or video is
provided.
The channel is for data broadcasting.
the channel is
Viewing Card is not plugged in.
scrambled or not
available.
Wrong Viewing Card is in use.
Viewing Card is not plugged in correctly.
Viewing Card is damaged.
The channel has a video signal, but no audio is
Audio not available
provided.
CAM (Conditional Access Module) is not installed.
cAM (conditional CAM (Conditional Access Module) is not inserted
Access Module) not correctly
installed.
CAM (Conditional Access Module) is not
recognized.
Wrong CAM (Conditional Access Module).
invalid cAM
CAM (Conditional Access Module) is not inserted
(conditional
correctly.
Access Module)
CAM (Conditional Access Module) is damaged
GB-5
What to do
Adjust aerial.
Check the cable from the aerial. If you cannot resolve the
problem, you may need to have your aerial and installation
tested by a professional.
Confirm if the channel is currently on air.
The channel cannot be viewed without the appropriate
model that supports data channels.
Insert Viewing Card.
Insert the appropriate Viewing Card for the channel(s) you
wish to view.
Reinsert Viewing Card; ensure that it is inserted correctly.
Contact your Viewing Card retailer or channel broadcaster
for a Viewing Card replacement.
Press the VOL+/- button on your remote control to confirm
that the channel has audio options.
Insert CAM (Conditional Access Module).
Reinsert CAM (Conditional Access Module).
Insert a different CAM (Conditional Access Module) to
check if your existing module is working.
Insert the correct CAM (Conditional Access Module).
Remove and reinsert the CAM (Conditional Access
Module).
Replace CAM (Conditional Access Module).