How To Adjust A Setting - Lenovo LXB-L17C User Manual

Adjust brightness or function adjustment.
• Auto Config Key / EXIT:
1. When OSD menu is in active status, this knob will act as EXIT-KEY
(EXIT OSD menu)
2. When OSD menu is in off status, press this knob over 1 seconds to be
in Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock
and Focus automatically.
NOTES
•
Do not install the monitor in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, or excessive
dust or mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will
come in handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally
packed at the factory.
•
To maintain the cleanness of your LCD display, wipe it periodically with
clean and soft cloth. The screen may be damaged by any liquid splash.
•
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a
mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As
a safety precaution, always unplug the monitor before cleaning it.

HOW TO ADJUST A SETTING

The monitor controls are accessed by pressing button MENU to enable OSD
(On-Screen-Display). The main menu will be displayed as follows (see
figure 5 ). If OSD window is in Chinese when power on (see figure 6), press
the Contrast/UP Key or Brightness/Down Key to choose the next window.
Choose the English, then press MENU Key for confirming. OSD window will
display in English.
1. Press the MENU-Key to show the OSD window. See figure 6.
2. Press or
3. Press or
when desired setting is done.
4. If you want to adjust any other items, repeat steps 2-4.
to select the adjusted item, then press the MENU-key.
to change the settings of selected item. Press MENU-key
9