Bluetooth Connection - Motorola FR6874 User Manual

Troubleshooting the FR6874 (Continued)
Table 7-1
Problem
The FR6874 does
not accept scan
input.

Bluetooth Connection

Troubleshooting Bluetooth Connection
Table 7-2
Problem
FR6874 cannot find
any Bluetooth
devices nearby.
When trying to
connect a Bluetooth
phone and FR6874,
the phone thinks a
previously paired
FR6874 is used.
Cause
Scanning Load a scanning application on the FR6874. See the
application is not system administrator.
loaded.
Unreadable bar Ensure the symbol is not defaced.
code.
Distance between Place the FR6874 within proper scanning range.
exit window and bar
code is incorrect.
FR6874 is not Program the FR6874 to accept the type of bar code being scanned.
programmed for the
bar code.
FR6874 is not If the FR6874 does not beep on a good decode, set the application
programmed to to generate a beep on good decode.
generate a beep.
Battery is low. If the scanner stops emitting a laser beam upon a trigger press,
check the battery level. When the battery is low, the scanner shuts
off before the FR6874 low battery condition notification. Note: If
the scanner is still not reading symbols, contact the distributor or
Motorola.
Cause
Too far from other Move closer to the other Bluetooth device(s), within a range of 10
Bluetooth devices. meters.
The Bluetooth Turn on the Bluetooth device(s).
device(s) nearby are
not turned on.
The Bluetooth Set the Bluetooth device(s) to discoverable mode. If needed, refer to
device(s) are not in the device's user documentation for help.
discoverable mode.
The phone Manually delete the pairing device and name from the phone. Refer
remembers the to the phone's user documentation for instructions.
name and address
of the FR6874 it
last paired with via
the Bluetooth
radio
Maintenance & Troubleshooting
Solution
Solution
101