Hot Key3 (Selecting The Input); Main Menu - Acer PE320QK User Manual

Hot key3 (Selecting the input)

Open the Input control and select DP,HDMI1(2.0), HDMI2(2.0) or Auto Source. When
you are done, press the joystick to exit current page and store.

Main Menu

Press the MENU key to open the OSD.
Toggle the joystick
toggle to the right to navigate to the element you wish to adjust and press the joystick
to enter it.
Toggle the joystick
Information Hot Key
Modes Hot Key
Exit Hot Key to exit current page and store.
X
Picture
• Brightness: Adjust the brightness from 0 to 100.
Note: Adjusts the balance between light and dark shades.
• Contrast: Adjust the contrast from 0 to 100.
Note: Sets the degree of difference between light and dark areas.
• Black Boost: Adjust the Black Boost from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
• Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
shown -- Off, 80%, 70%, 60%, or 50%.
Note: Higher values allow more blue light through. For the best protection select a lower
value.
When "Blue Light" is on, Brightness & Contrast will show each level of "Blue Light"
value.
• ACM: Turn ACM on or off.
Note: Set to "On", will be based on the current screen to dynamic contrast adjustment.
• HDR: Can control On, Off and Auto, set to Auto will automatically detect and deal with
HDR signal.
Auto: Auto checked source status.
On: Support HDR effect.
Off: No support HDR effect.
Input
Auto Source
Move
Enter
to the up or down
to the left or right to adjust the sliding scales.
Show Monitor Information and Reset control function.
:
To change Modes Hot Key menu.
:
Mode - Standard
Picture
Brightness
Color Contrast
Black Boost
Audio
Blue Light
Gaming
ACM
OSD
HDR
System
Super Sharpness
Move
Enter
15
Input
HDMI1(2.0)
On
Exit
to select Picture from the OSD.Then
80
50
5
Off
Off
Off
Off
PE320QK User Guide English
X