Selecting The Hdmi 4K Signal Format (4K Mode); Backuping And Restoring All The Settings (Bkup/Rstr) - Yamaha RX-V485 Owner's Manual

Selecting the HDMI 4K signal format (4K MODE)

LINK MASTER STEREO TUNED ZONE
2 A
SLEEP PARTY
OUT 2 -R
Hi es ENHANCER YPAO VOL. A- DRC
ECO
4K MODE•MODE 1
Selects the format of signals input/output at the unit when HDMI 4K compatible TV and
playback device are connected to the unit.
ADVANCED SETUP menu
"4K MODE"
Settings
Inputs/outputs 4K signals shown in the following table. Depending on the
MODE 1 connected device or HDMI cables, video may not be displayed correctly.
In this case, select "MODE 2".
MODE 2 Inputs/outputs 4K signals shown in the following table.
Note
When "MODE 1" is selected, use a Premium High Speed HDMI Cable or Premium High Speed Cable with
Ethernet.
Format
RGB 4:4:4
YCbCr 4:4:4
4K/60, 50 Hz
YCbCr 4:2:2
YCbCr 4:2:0
RGB 4:4:4
4K/30, 25, 24 Hz YCbCr 4:4:4
YCbCr 4:2:2
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
MODE 1 MODE 2
8 bit 10 bit 12 bit 8 bit 10 bit
–
4
–
4
4
4 4
4 4
4 4
4 4

Backuping and restoring all the settings (BKUP/RSTR)

LINK MASTER
OUT 2
ECO
BKUP/RSTR•BKUP
Backups and restores all the unit's setting to a USB memory device. Prepare a USB
memory device using FAT16 or FAT32 format in advance.
ADVANCED SETUP menu
"BKUP/RSTR"
Settings
RSTR
BKUP
1
Connect the USB memory device to the USB jack on the front
panel.
2
To start the process, press STRAIGHT to select "BKUP" or
"RSTR" and then press INFO on the front panel.
3
Press INFO again after the confirmation message appears on the
12 bit
front display.
–
4
– When "Complete" appears on the front display, press z (power)
to set the unit to standby mode and turn it on again.
–
–
If "Failed" appears on the front display, check the following and start the
–
process again.
–
117
En
STEREO TUNED ZONE
2 A 3 B
SLEEP PARTY
-R
Hi es ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
Restores all the previous backuped settings.
Backups all the settings.