Connecting The Cable Modem Continued...
Connect the coaxial cable provided for the Internet connection to the jack
labeled "CABLE IN" in the back of the cable modem unit.
Wait 1 to 3 minutes for the link light to
illuminate. If the link light does not
glow, please contact your broadband
cable company for further instructions.
A. Connect an Ethernet cable to the
port labeled "Ethernet" on the back
of the cable modem
B. Connect a USB cable to the "USB
type B" port on the back of cable
modem unit.
IMPORTANT Note:
* The DCM-200 USB/Ethernet Cable Modem
will only work with either the Ethernet port or
the USB port at one time. THEY CANNOT
WORK SIMULTANEOUSLY.
.
2