Administration Settings - D-Link DFL-1100 Installation Manual

DFL-1100 Installation Guide

Administration Settings

Administration Settings
The Administration settings screen can be found by clicking on the System tab and selecting the Administration button.
By default, administrative access is limited to the LAN interface. The selection you made during the Setup Wizard
determines whether you can access the DFL-1100 via HTTP and HTTPS or only via HTTPS. Additional interfaces can be
configured for administrative access by selecting the appropriate interface (WAN, DMZ, or ETH4).
Management web GUI ports: These are the HTTP and HTTPS ports being utilized by the DFL-1100 for web-based
configuration. The default settings are the standard port 80 for HTTP and port 443 for HTTPS. For security reasons, you
may want to use non-standard port numbers.
12