Lcd Panel - D-Link DFL-1600 Quick Manual

DFL-1600 Quick Installation Guide
2.2 LCD Panel and Keypad
When you turn on the power of the DFL-1600, the LCD panel
will display the following message:
setup"
menu. If after five seconds, you do not press any key on the
keypad, the DFL-1600 will automatically start the system.
2.2.1 Startup Menu
If you press any key within five seconds after power-on, the
LCD will display two options:
1. Start
using the configuration saved inside the device.
2. Reset
using the factory default configuration.
Note:
If you select "Reset Firewall" and confirm this option, all previous
configurations that you saved in this device will be lost forever.
03
and press any key on the keypad to enter the startup
Back Button
Confirm Button
Keypad buttons definition in Startup Menu
Firewall: If you select this option, the system will start,
Firewall: If you select this option, the system will start,
"Press Keypad to enter
Not Used
Next Button