DeWalt DXFRS300 Owner's Manual page 9

Voice Activated Transmit (VOX)
In VOX mode, your radio can be used "hands-free," automatically
transmitting when you speak. You can set the VOX sensitivity level to fit the
volume of your voice and avoid transmissions triggered by background noise.
To turn VOX mode on or off:
Mode Button
1. Press the Mode button until the VOX icon shown on
the display. The current On or Off setting is
displayed.
2. Press the Up or Down button to turn VOX On or Off.
VOX Icon
3. Choose one of the following:
a. Press the Mode button to enter the new setting
and proceed to other functions.
Up/Down Button
b. Press the Talk button to return to Standby mode.
To set VOX sensitivity:
Mode Button
1. Press the Mode button until the VOX icon flashes and
the current sensitivity level is displayed.
The current VOX sensitivity level is
displayed with letters "L" and a Number 1
VOX Sensitivity Level
through 5, with Number 5 being the most
sensitive level and Number 1 being the
least sensitive level.
Up/Down Button
2. Press the Up or Down button to change the setting.
3. Choose one of the following:
a. Press the Mode button to enter the new setting
and proceed to other functions.
b. Press the Talk button to return to Standby mode.
c. Do not press any buttons for 6 seconds to return to
Standby mode.
11
Vibra Alert and Call Alert
Your radio can alert you to incoming signals by sounding an audible call
tone or an audible tone with Vibra Alert.
To change call settings:
Call Tone On/
Vibration Off 1. Press the Mode button until the Call Setting icon is
shown on the display. The current setting ("0" ring
only, "1" vibrate + ring) is displayed.
2. Press the Up or Down button to change the call
setting.
Call Tone On/
Vibration On
3. Choose one of the following:
a. Press the Mode button to enter the new setting
and proceed to other functions.
b. Press Talk button to return to Standby mode.
c. Do not press any buttons for 6 seconds to
return to Standby mode.
Note: Vibra Alert will be suspended during charging
Roger Beep Confirmation Tone
Your listener will hear an audible tone when you release the Talk button.
This alerts the other party that you have finished talking and it is OK for
them to speak.
Key Tone
Key Tone is an audible tone which will sound each time a button is pressed.
12