Battery Installation; Battery Instructions; Motor Overheat Protection - Kenmore 405.35040510 Use & Care Manual

II. REMOTE CONTROL
1. Point the remote control at the control panel display screen
and press the desired button.
2. The remote control will work at distances of up to 16 feet
and from an angle of 30 degrees to the left or right of the
fan control panel.
3. Remove batteries from remote control if remote control is to
be discarded.
4. [ ] FAN SPEED KEY
The On/Off, Timer and Oscillation key of the remote control look
and work exactly as those on the Control Panel. However, to adjust fan speed,
press the Fan Speed Key to change the setting to 1 (Low), 2 (Medium) or 3 (High).

BATTERY INSTALLATION

(batteries not supplied with product)
1. Press down on the battery compartment cover
and slide it out.
2. Insert the AAA batteries, making sure that the
positive
terminals are facing the proper way.
3. Replace the cover.

BATTERY INSTRUCTIONS

- Do not dispose of batteries in fire; batteries may
explode or leak.
- Do not mix old and new batteries. Replace all batteries
at the same time.
- Do not mix alkaline, standard and rechargeable batteries
together in the battery compartment. Use only one battery type.
HOW TO USING THE REMOTE CONTROLLER CORRECTLY
Point the remote control at the receptor (black circle) on the fan control panel.
Press the desired button on remote. The remote control will work at distances of
up to 20 feet and from an angle of 60 degrees to the left or right of the fan
control panel. Remove batteries from remote control and dispose of properly
if remote control is to be discarded.

MOTOR OVERHEAT PROTECTION

The motor has a thermal fuse that burns out to shut the fan off if the fan motor
becomes highly overheated. The shutoff allows the motor to cool down before any
plastic parts of the fan can be deformed by the high heat. If the motor overheat
protection fuse shuts the fan down, call Customer Assistance at 1-866-646-4332 to
arrange for possible fan repair.
4
AAA Battery