D-Link AirPlus Xtreme G DWL-2000AP Manual page 13

Getting Started (continued)
Setting up a
Wireless
Please remember that D-Link Air Plus Xtreme G™ wireless devices are pre-configured to
connect together, right out of the box, with their default settings.
For a typical wireless setup at home (as shown above), please do the following:
You will need broadband Internet access (a Cable or DSL-subscriber line into
your home or office)
Consult with your Cable or DSL provider for proper installation of the modem
Connect the Cable or DSL modem to the DI-604 Ethernet Broadband Router
(see the printed Quick Installation Guide included with your router.)
Connect the Ethernet Broadband Router to the DWL-2000AP (See the printed
Quick Installation Guide included with the DWL-2000AP.)
If you are connecting a desktop computer to your network, install the D-Link
AirPlus Xtreme G™ DWL-G520 wireless PCI adapter into an available PCI slot
on your desktop computer. You may also install the DWL-520+.
(See the printed Quick Installation Guide included with the network adapter.)
Install the drivers for the D-Link DWL-G650 wireless Cardbus adapter into a
laptop computer.
(See the printed Quick Installation Guide included with the DWL-G650.)
2
3
4
1
5
6
13