Advertisement
Connecting The DWL-800AP+ Wireless
Range Extender To Your Network
A.
First, connect the power adapter to the receptor at the back panel of the
DWL-800AP+ and then plug the other end of the power adapter to a wall
outlet or power strip. The Power LED will turn ON to indicate proper operation.
B.
Using a Ethernet cable, insert one end of the cable to the
back panel of the DWL-800AP+ and the other end of the cable to a switch.
Note: You also have the option of connecting the DWL-800AP+ directly to the
computer that will be used for configuration. The Link LED light will illuminate
to indicate a proper Ethernet connection.
DWL-800AP+ is Auto-MDI/MDIX. Meaning you can use a straight-
through or crossover-cable to the LAN Port.)
C.
Computers with 802.11b wireless adapters such as the DWL-650+ AirPlus
Wireless Cardbus Adapter and the DWL-520+ AirPlus Wireless PCI Adapter
can connect to the DWL-800AP+. By default, the DWL-800AP+ is set in
repeater mode and will extend the wireless signal from a wireless gateway or
access point.
C.
Used to wirelessly
connect to 802.11b
networks.
A.
Receptor for
Power Adapter
Antenna
2
LAN port on the
(Note:The LAN Port on the
B.
LAN Port
This is the connection for
Ethernet cables to your
Ethernet-enabled device.
Advertisement
