Page 2
DWL-AG700AP Install Guide System Requirements D-Link Systems, Inc.
Page 3
ON to indicate proper operation. Using an Ethernet cable, insert one end of the cable to the LAN port on the rear panel of the DWL-AG700AP and the other end of the cable to a switch. Note: You also have the option of connecting the DWL-AG700AP directly to the computer that will be used for configuration.
Page 4
Then press the Enter or Return key. The logon pop-up screen will appear. Type admin for the username and leave the password field blank. Once you have logged in, the Home screen will appear. Click Run Wizard D-Link Systems, Inc. DWL-AG700AP DWL-AG700AP DWL-AG700AP...
Page 5
Click Next 802.11a networks please do the following: Step 2 - Set Wireless LAN Connection. By default the DWL-AG700AP SSID is set to default with a Channel setting of 52. Click Next DWL-AG700AP D-Link Systems, Inc.
Page 6
8 0 2 . 1 1 g n e t wo r k s please do the following: Step 2 - Set Wireless LAN Connection. By default the DWL-AG700AP SSID is set to default with a Channel setting of 6. Click Next D-Link Systems, Inc. DWL-AG700AP...
Page 7
Using the Setup Wizard DWL-AG700AP 802.11g networks please continue as follows: Step 3 - Encryption The DWL-AG700AP is capable of three levels of wireless encryption: 64-,128-,or 152-bit, using either Hexadecimal or ASCII key type. By default encryption is disabled. You...
Page 8
DWL-AG700AP Install Guide Your Setup is Complete! When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: D-Link Systems, Inc.
Page 9
DWL-AG700AP Install Guide Contacting Technical Support D-Link Systems, Inc.
Page 10
DWL-AG700AP Install Guide Notes Notes D-Link Systems, Inc.
Page 11
DWL-AG700AP Install Guide Notes Notes D-Link Systems, Inc.
Page 12
DWL-AG700AP Install Guide Notes Notes D-Link Systems, Inc.