Dell EqualLogic FS7600 Series Hardware Owner's Manual page 20

Dell EqualLogic FS7600 Hardware Owner's Manual 2 Replacing Components
Figure 11: Removing the Bezel
Attaching the Bezel
To attach the bezel, see Figure 12 and follow these steps:
1. Insert the right side of the bezel into the slot on the right side of the chassis (callout 1).
2. Push the bezel toward the left side and engage the bezel with the left side of the chassis (callout 2).
3. Use the key to lock the bezel (callout 3).
Figure 12: Attaching the Bezel
14