Advertisement
Step 4.
• Connect wiring harness (26 & 28 & 29) to console (34). Attach console
(34) to console mast (2) using 4 screws (75). Be careful not to pinch any
wires.
• Attach console bracket cover (42) to handlebars (3) using 2 screws (74).
• Install the front stabilizer cover (40) and the rear stabilizer cover (41)
onto the main frame (1) with 4 screws (75).
• Attach cup holder (116) to console mast (2) using 2 screws (75).
• Install the left and right pedals (45 & 46) onto the left and right crank
arms (16 l & 16 r). The left pedal has a reverse thread and will be
screwed in with the opposite rotation. Make sure to tighten the pedals
as much as possible.
• Install the seat (19) onto the seat post (7).
Hardware for step 4
Part
Type
74
Phillips head screw
75
Phillips head screw
34
19
45
75
41
Description
M5 × 6L
M5 × 12L
3
7
16R
5
75
100
13
Qty
2
10
29
28
26
75
116
75
2
75
1
46
117
93
74
42
75
40
Advertisement
