Figure 7-4
①
②
③
Figure 7-5
①
②
③
[ID: 403.01]
7.3.3
Re-assembly
Re-assembly instructions
If possible, assemble the motor on a straightening plate. This ensures that the feet surfaces
are all on the same level.
A5E00264365A
Siemens AG Operating Instructions 2.02 1PL622
Disassembling the speed sensor: forcing off, 1st option
Unscrew the screw M5x50.
Screw in the screw M5x10 and the screw M6x70 one after the other. This releases
the sensor cone in the motor shaft.
Remove the sensor.
Disassembling the speed sensor: forcing off, 2nd option
Release the retaining screw.
Press the screw M10 onto the original screw. This causes it to fall out.
Remove the sensor.
Maintenance
7.3 Corrective Maintenance
65