LG DLEY1201 Series Owner's Manual page 30

30 OPERATION
1 POWER Button
Press to turn the dryer ON. Press again to turn the
dryer OFF.
NOTE
Pressing the POWER button during a cycle will
cancel that cycle and any load settings will be
lost.
2 Steam Functions
LG's steam technology allows you to inject fabrics
with a swirling jet of steam to refresh clothes, reduce
static, and make ironing easier. Simply select the
Steam Fresh™ cycle or Wrinkle Free cycle.
3 Time and Status Display
The display shows the settings, estimated time
remaining, options, and status messages for your
dryer.
4 START/PAUSE Button
Press this button to start the selected cycle. If the
dryer is running, use this button to pause the cycle
without losing the current settings.
NOTE
If you do not press the START/PAUSE button to
resume a cycle within 4 minutes, the dryer turns
off automatically.
5 Cycles Button
Press the Cycles button repeatedly to scroll through
the cycle selections until the desired cycle is selected.
The standard presets for the selected cycle will be
shown in the display. On MANUAL DRY cycles,
these settings can be adjusted using the cycle setting
buttons any time before starting the cycle.
6 more Time/Less Time Buttons
Use these buttons with the Time Dry and other
MANUAL DRY cycles to adjust the drying time.
Press the more Time button to increase the selected
manual cycle time by 1 minute; press the Less Time
button to decrease the cycle time by 1 minute.
7 Cycle Option Buttons
The Cycle option buttons allow you to select
additional cycle options. Certain buttons also allow
you to activate special functions by pressing and
holding the button for 3 seconds.
8 Cycle modifier Buttons
Use these buttons to select the desired cycle settings
for the selected cycle. The current settings are shown
in the display. Press the button for that option to
select other settings.