Advertisement
4.6
Changing the Units
Note: the meter is pre-set to display litres.
4.6.1
Press button "2" on the rear of the meter for 1 sec to enter the correction Factor
mode.
4.6.2 Press the Move button five times to select the units (fig.4.3).
4.6.3
Press the Reset button to scroll through the Units (L/Gal/Pt/Qt), select the Unit
required.
4.6.4
Press "2" for 1 sec to quit the correction Factor mode.
5. mAINTeNANCe
5.1
Changing the Digital Meter Battery
5.1.1
Remove the rubber protective cover from the meter.
5.1.2
Remove the screw and cover from the side of the meter.
5.1.3 Remove and replace battery (fig.7).
5.1.4
Replace cover and secure with screw.
5.1.5
Replace the protective rubber cover.
Note: If the LcD display does not activate, remove the meter as in section 4.5.1, press
button 1 (fig.6.1) to reboot the meter.
5.2
Before every use visually check the supply hose for damage and check all joints
for leaks, any damaged component must be replaced or leaks repaired before
using.
5.3
check the nozzle valve for leaks, if it does not seal, replace before using.
5.4
Drain air regulator water trap daily.
5.5
top up lubricator as required, using a quality air tool oil.
5.6
To change the silencer, remove the circlip (fig.8) and remove the old silencer,
place a new silencer into the recess and refit the circlip.
Note: For any other maintenance and repairs the unit should be returned to your
Sealey dealer.
6. DeClARATION OF CONFORmITY
Declaration of Conformity
standards and directives
Oil Dispensing Pump Station
Air Operated
Model: AK4560D
2002/95/Ec RoHS Directive
2002/96/EEc WEEE Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
ImpORTANT: no liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORmATION: call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.
We, the sole importer into the UK, declare that the product listed below is in conformity with the following
Signed by Steve Buckle
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
the construction file for this product is held by the Manufacturer and may be inspected on
request by contacting Jack Sealey Ltd.
Sole U.K. Distributor
Sealey Group
Bury St. Edmunds
Suffolk.
Battery cover
2
5th november 2008
01284 757500
Web
01284 703534
AK4560D
Meter
Screws
fig.5
1
fig.6
fig.7
fig.8
www.sealey.co.uk
sales@sealey.co.uk
Issue no: 1 - 05/11/08
Advertisement
