Table of Contents
Advertisement
Check that the wine conditioning unit
is standing securely in the niche and
that the door closes properly.
Installing the wine conditioning
unit
Before installing the wine condition-
ing unit
Take any accessories out of the appli-
ance.
Remove the cable clip from the back
of the appliance (depending on
model).
Risk of damage and injury from
wine conditioning unit tipping over.
There is an increased risk of injury
and damage if the wine conditioning
unit is installed by a single person.
Two people are required for installing
the wine conditioning unit.
Install the wine conditioning unit in a
stable, solid housing unit, positioned
on an even and level floor.
The building-in niche must be hori-
zontally and vertically aligned.
The required ventilation gaps must be
provided (see "Installation" – "Ventila-
tion" and "Building-in dimensions").
The following parts are supplied with
the wine conditioning unit:
All installation parts are number coded.
This coding is also used in the installa-
tion instructions.
– Required for installing the wine con-
ditioning unit in its housing unit:
Installation
67
Advertisement
Table of Contents
