D-Link DAP-600P Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Access Point
  5. DAP-600P
  6. Quick installation manual

D-Link DAP-600P Quick Installation Manual

Wireless ac2600 wave 2 mu-mimo dual band poe access point / router
Hide thumbs Also See for DAP-600P:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Installation Guide
DAP-600P
Wireless AC2600 Wave 2 MU-MIMO Dual Band PoE
Access Point / Router

Advertisement

Table of Contents
loading

Related Manuals for D-Link DAP-600P

Summary of Contents for D-Link DAP-600P

  • Page 1 Quick Installation Guide DAP-600P Wireless AC2600 Wave 2 MU-MIMO Dual Band PoE Access Point / Router...

  • Page 2: Before You Begin

    If any of the items are missing, please contact your reseller. The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.

  • Page 3: Default Settings

    DAP-600P Quick Installation Guide Default Settings IP address of device 192.168.0.50 admin Username (login) admin Password 2.4GHz DAP-600P Name of wireless network (SSID) 5GHz DAP-600P-5G see WPS PIN on the barcode Network key (PSK password) label on the bottom panel of...

  • Page 4: System Requirements And Equipment

    DAP-600P Quick Installation Guide System Requirements and Equipment A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the access point: • ◦ Apple Safari 8 and later ◦ Google Chrome 48 and later ◦...

  • Page 5: Pc With Ethernet Adapter

    DAP-600P Quick Installation Guide CONNECTING TO PC PC with Ethernet Adapter 1. Сonnect an Ethernet cable between the LAN port of the access point and the Ethernet port of your PC. 2. For a switch supporting PoE: connect an Ethernet cable between the PoE-enabled switch and the WAN port of the access point.

  • Page 6: Configuring Ip Address In Os Windows 7

    DAP-600P Quick Installation Guide Configuring IP Address in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
  • Page 7 Click the OK button. 7. Click the OK button in the connection properties window. Now you can connect to the web-based interface of DAP-600P for configuring all needed parameters. To gain access to an external network (to the Internet), you...
  • Page 8 DAP-600P Quick Installation Guide Configuring IP Address in OS Windows 10 1. Click the Start button and proceed to the Settings window. 2. Select the Network & Internet section. 3. In the Change your network settings section, select the Change adapter options line.
  • Page 9 Click the OK button. 7. Click the Close button in the connection properties window. Now you can connect to the web-based interface of DAP-600P for configuring all needed parameters. To gain access to an external network (to the Internet),...

  • Page 10: Pc With Wi-Fi Adapter

    DAP-600P Quick Installation Guide PC with Wi-Fi Adapter 1. For a switch supporting PoE: connect an Ethernet cable between the PoE-enabled switch and the WAN port of the access point. 2. For a switch not supporting PoE or router: connect an Ethernet cable between the switch or router and any Ethernet port of the access point.

  • Page 11: Configuring Wi-Fi Adapter In Os Windows 7

    DAP-600P Quick Installation Guide Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by...
  • Page 12 DAP-600P Quick Installation Guide 6. Select the Use the following IP address radio button and enter the value 192.168.0.51 in the IP address field. The Subnet mask field will be filled in automatically. Click the OK button. 7. Click the OK button in the connection properties window.
  • Page 13 11. Wait for about 20-30 seconds. After the connection is established, the network icon will be displayed as the signal level scale. Now you can connect to the web-based interface of DAP-600P for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.
  • Page 14 DAP-600P Quick Installation Guide Configuring Wi-Fi Adapter in OS Windows 10 1. Click the Start button and proceed to the Settings window. 2. Select the Network & Internet section. 3. In the Change your network settings section, select the Change adapter options line.
  • Page 15 9. In the opened window, in the list of available wireless networks, select the wireless network DAP-600P (for operating in the 2.4GHz band) or DAP-600P-5G (for operating in the 5GHz band) and click the Connect button.
  • Page 16 Now you can connect to the web-based interface of DAP-600P for configuring all needed parameters. To gain access to an external network (to the Internet), you also need to specify the default gateway and the addresses of DNS servers.

  • Page 17: Configuring Access Point

    DAP-600P Quick Installation Guide CONFIGURING ACCESS POINT Connecting to Web-based Interface Start a web browser. In the address bar of the web browser, enter the IP address of the access point (by default, the following IP address is specified: 192.168.0.50). Press the Enter key.
  • Page 18 DAP-600P Quick Installation Guide If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
  • Page 19 DAP-600P Quick Installation Guide The Summary page displays general information on the access point and its software. The web-based interface of the access point is bilingual (English/Russian). You can select the needed language upon the initial configuration of the web- based interface of the access point or in the System / Configuration section of the menu.

  • Page 20: Initial Configuration Wizard

    Click the OK button and wait until the factory default settings are restored. If you perform initial configuration of the access point via Wi-Fi connection, please make sure that you are connected to the wireless network of DAP-600P (see the WLAN name (SSID) in the Default Settings section, page 3) and click the NEXT button.
  • Page 21 DAP-600P Quick Installation Guide 1. Click YES in order to leave the current language of the web-based interface or click NO to select the other language. 2. On the next page, click the CONTINUE button.

  • Page 22: Selecting Operation Mode

    DAP-600P Quick Installation Guide Selecting Operation Mode Select the needed operation mode and click the NEXT button. Router In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Autonomous value. Then from the Work mode list, select the Router value.
  • Page 23 DAP-600P Quick Installation Guide Access Point or Repeater In order to connect your device to a wired router for adding a wireless network to the existing local network, on the Device mode page, from the Connection method list, select the Autonomous value. Then from the Work mode list, select the Access point value.
  • Page 24 Quick Installation Guide Mesh Network Main Device (Master) In order to configure DAP-600P as a main device of your Mesh network, from the Connection method list, select the Super Mesh value. Then from the Device Role list, select the Master value. From the Frequency band list, select the band where your Mesh network operates.
  • Page 25 DAP-600P Quick Installation Guide In order to connect your main device to a wireless ISP (WISP), from the Work mode list, select the WISP Repeater value. In this mode you can connect your device to another access point, configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and 5GHz bands, and set...
  • Page 26 Quick Installation Guide Mesh Network Subordinate Device (Slave) In order to configure DAP-600P as a subordinate device of your Mesh network, from the Connection method list, select the Super Mesh value. Then from the Device Role list, select the Slave value. From the Frequency band list, select the band where your main device (in the Master role) operates.

  • Page 27: Changing Lan Ipv4 Address

    1. Select the Automatic obtainment of IPv4 address to let DAP-600P automatically obtain the LAN IPv4 address. If you want to manually assign the LAN IPv4 address for DAP-600P, do not select the Automatic obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, DNS IP address, Hostname fields and, if needed, the Gateway IP address field.
  • Page 28 DAP-600P Quick Installation Guide Wi-Fi Client This configuration step is available for the WISP Repeater and Repeater modes. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window.

  • Page 29: Configuring Wan Connection

    DAP-600P Quick Installation Guide Configuring WAN Connection This configuration step is available for the Router and WISP Repeater modes. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your connection.
  • Page 30 DAP-600P Quick Installation Guide PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access): Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
  • Page 31 DAP-600P Quick Installation Guide PPTP + Dynamic IP or L2TP + Dynamic IP: Enter authorization data provided by your ISP (the username (login) in the Username field and the password in the Password field). Click the Show icon ( ) to display the entered password.
  • Page 32 DAP-600P Quick Installation Guide 2. If your ISP uses MAC address binding, select the Clone MAC address of your device checkbox. 3. If the Internet access is provided via a VLAN channel, select the Use VLAN checkbox and fill in the VLAN ID field.

  • Page 33: Configuring Wireless Network

    DAP-600P Quick Installation Guide Configuring Wireless Network This configuration step is available for the Router, Access point, WISP Repeater, and Repeater modes. 1. On the Wireless Network 2.4 GHz page, in the Network name field, specify your own name for the wireless network in the 2.4GHz band or leave the value suggested by the access point.
  • Page 34 DAP-600P Quick Installation Guide 5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox (available for the Router and WISP Repeater modes only). 6. In the Network name field, specify your own name for the guest wireless network or leave the value suggested by the access point.

  • Page 35: Changing Web-Based Interface Password

    DAP-600P Quick Installation Guide Changing Web-based Interface Password On this page you should change the default administrator password. To do this, enter a new password in the Admin password and Password confirmation fields. You may set any password except admin. Use digits, Latin letters (uppercase and/or lowercase), and other characters available in the US keyboard layout.

  • Page 36: Configuring Local Area Network

    DAP-600P Quick Installation Guide Configuring Local Area Network 1. Go to the Connections Setup / LAN page. 2. If needed, change the IPv4 address of the access point's LAN interface and the mask of the local subnet. To do this, click the IPv4 tab and specify needed values in the IP address and Mask fields in the Local IP Address section.
  • Page 37 DAP-600P Quick Installation Guide IPv4 address assignment. By default, the DHCP server of the device in the access point mode is disabled (the Disable value is selected from the Mode of dynamic address assignment drop-down list on the IPv4 tab). As a rule, the DHCP server should be disabled when the device is used in the access point mode.

  • Page 38: Specifications

    DAP-600P Quick Installation Guide SPECIFICATIONS Hardware · Processor MT7621AT (880MHz, dual core) · 128MB, DDR3 SDRAM · 16MB, SPI Flash · 10/100/1000BASE-T WAN port with PoE support Interfaces · 10/100/1000BASE-T LAN port · POWER / WLAN LEDs · INTERNET ·...
  • Page 39 DAP-600P Quick Installation Guide Software · DHCP server/relay Network functions · Advanced configuration of built-in DHCP server · Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation · Automatic obtainment of LAN IP address (for access point/repeater/client modes) · DNS relay ·...
  • Page 40 DAP-600P Quick Installation Guide Software · Local and remote access to settings through Management and monitoring SSH/TELNET/WEB (HTTP/HTTPS) · Bilingual web-based interface for configuration and management (Russian/English) · Notification on connection problems and auto redirect to settings · Firmware update via web-based interface ·...
  • Page 41 DAP-600P Quick Installation Guide Wireless Module Parameters · Super Mesh function Advanced functions · “Client” function (access point mode) Wireless network client Wireless network repeater · “Client” function (router mode) WISP repeater · WMM (Wi-Fi QoS) · Information on connected Wi-Fi clients ·...
  • Page 42 DAP-600P Quick Installation Guide Wireless Module Parameters · 802.11a (typical at room temperature 25 °C) Transmitter output power 17dBm at 6, 54Mbps · 802.11b (typical at room temperature 25 °C) The maximum value of the 17dBm at 1, 11Mbps transmitter...
  • Page 43 DAP-600P Quick Installation Guide Wireless Module Parameters -79dBm at MCS1 -77dBm at MCS2 -74dBm at MCS3 -70dBm at MCS4 -66dBm at MCS5 -65dBm at MCS6 -64dBm at MCS7 HT40 -79dBm at MCS0 -76dBm at MCS1 -74dBm at MCS2 -71dBm at MCS3...
  • Page 44 DAP-600P Quick Installation Guide Wireless Module Parameters · Modulation schemes 802.11a: BPSK, QPSK, 16QAM, 64QAM with OFDM · 802.11b: DQPSK, DBPSK, DSSS, CCK · 802.11g: BPSK, QPSK, 16QAM, 64QAM with OFDM · 802.11n: BPSK, QPSK, 16QAM, 64QAM, 256QAM with OFDM ·...

  • Page 45: Safety Rules And Conditions

    DAP-600P Quick Installation Guide SAFETY RULES AND CONDITIONS Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged. The device should be used only as intended in accordance with the documents.

  • Page 46: Technical Support

    Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by e- mail/Internet.

Table of Contents