T-Link - Connecting A Soundbar Using Arc; T-Link - Connecting A Bluray Player Using Arc - Pioneer L50USD14N Instruction Manual

5
Customising TV Settings

T-Link - connecting a soundbar using ARC

GB
If you would like to connect a soundbar/surround sound system
to your TV using the ARC (Audio Return Channel) you will need
to switch T-Link on.
1. Connect your Soundbar/Surround sound system using a
HDMI cable (type 1.4) to the socket marked HDMI 3 (ARC)
on your TV.
2. Switch on your TV and Soundbar/Surround sound system.
3. Press the OPTION button the Quick access menu will appear.
4. Press the
5. Press the
button again to switch T-LINK ON.
After a few seconds the name of the Soundbar/Surround sound
system will appear above the word SETUP.
6. Press the
button to highlight Enable Sys. Aud. Ctrl and press the
button.
In a second or two you should hear sound coming out of your
Soundbar/Surround Sound System.
With T-Link switched on your TV talks to the devices you have
connected. So if you turn your TV off, the connected devices will
switch off. Be patient this may take a few seconds.

T-Link - connecting a Bluray player using ARC

If you have connected a Bluray player to your TV using the HDMI ARC
connection, you will be able to control your player using your TVs
remote control.
1. With the player connected and T-Link switched on. Press the
OPTION button, then the
2. Press the
to highlight GUIDE MENU and press OK.
3. A diagram of a remote control will appear on the screen. Press the
corresponding buttons on your TV remote control to control your
Bluray player e.g. press number 3 to pause the film. This feature
may not be available on all models of Bluray player.
26
Pioneer L50/55USD14N_IB_English.indd 26
buttons to highlight T-LINK then press OK.
button to enter the SETUP menu, then press the
button to enter Soundbars menu. Press the
button to highlight SETUP.
button to enter the SETUP menu. Press the button
25/04/2014 10:37