Table of Contents
Advertisement
Battery level notification
• When the unit is turned off, an English guidance message will be heard indicating the battery level.
• When the battery level starts to run low, the blinking power/pairing LED will turn from blue to red, and as it drops
further, you will be notified by one beep every 1 minute. When the battery runs out, an English guidance message will
be heard and the power will turn off.
• It is possible to switch the language of the audio guidance. (
Auto power off
If the unit is not connected to a Bluetooth
unit automatically approximately 5 minutes after you have stopped using it.
• It is possible to switch the language of the audio guidance. (
– Auto power off does not work when the detachable cord (supplied) is connected.
Using the detachable cord (supplied)
While the power is turned off or the battery has no remaining charge, this
unit can be used as normal headphones by connecting the detachable
cord (supplied).
• Before connecting the detachable cord (supplied), lower the volume on the
connected device.
• If you connect the detachable cord (supplied) during Bluetooth
®
the Bluetooth
connection will be lost. ([RB-M300B] The unit turns off.)
• Noise may occur due to dirt on the plug. Clean the plug with a soft dry cloth if
this occurs.
• Do not use any other detachable cords except the supplied one.
• [RB-M500B] When the detachable cord (supplied) is connected and the power
is turned on, you can use the Bass reactor. However, the volume cannot be
adjusted in this case.
Resetting the unit
This unit can be reset when all operations are rejected. To reset the unit, connect the unit to a computer using
the USB charging cord. All the previous operations will be canceled. (The pairing device information will not be
deleted.)
Operation
l
13, "Guidance messages")
®
device, an English guidance message will be heard and turn off the
l
13, "Guidance messages")
®
connection,
14
Left (L)
side
Hide quick links:
Advertisement
Table of Contents
