Dell 1600n Owner's Manual page 44

You can load up to:
250 sheets of plain paper in
the paper tray
1 envelope in the manual
feeder
1sheet of labels in the manual
feeder
1 sheet of card stock in the
manual feeder
1 transparency sheet in the
manual feeder
1 sheet of custom sized paper
in the manual feeder
Your multi-function printer has two output locations; the rear output slot and the front
output tray. Before you begin copying, scanning, printing, or sending faxes, refer to the table
below about how much paper the printer output trays can hold:
Output Location
front output tray (face down)
rear output slot (face up)
3 4
Loading Pr int Media
Make sure:
The paper is designed for use with laser printers.
• The envelope is loaded vertically against the right side of the
paper support.
• The stamp location is in the upper left corner.
• The envelope is designed for use with laser printers.
• Squeeze and slide the paper guide to the width of the envelope
(as shown).
NOTE: Do not load envelopes with:
• Holes, perforations, cutouts, or deep embossing.
• Metal clasps, string ties, or metal folding bars.
• Exposed flap adhesive.
The label is designed for use with laser printers.
• The card stock is designed for use with laser printers.
• The thickness should not exceed 0.025 inches.
• The transparency is designed for use with laser printers.
• The rough side faces you.
Your paper size should fit within these dimensions:
Width
3.0-8.5 in. (76-216 mm)
Capacity
150 sheets of paper
one envelope, one label, card stack and transparency sheet
Length
5.0-14.0 in. (127-356 mm)