2.1 Communication Settings Connection Settings Baud Rate Data Bits Parity Stop Bits RS232 pin out DB-9 pin NOTE: DELL generally use common RS232 connector,So you just plug in connector from PC to DTV. Value 19200 None RS 232 Command Guide...
2.2 Protocol structure Command structure is used to pop up the OSD menu and adjust the settings. The control command syntax(From PC to DTV) is 16bit 8bit eType EF BE Make sure that All value is Hex. • Header -> Fixed like wID – EFBE. •...
Page 3
3. Using Omnivex tool Omnivex Control 4 allows you to manage device functions right from a PC without the need for any proprietary hardware or complicated programming. You could get more information from www.omnivex.com. You could test Omnivex tool using its trial version. Simply install it and copy the OCPlayer.dat into the installed directory.
Page 4
NOTE: Port depends on your environments. RS 232 Command Guide...
4. Command List s/n Command Description POWER ON POWER ON POWER OFF POWER OFF DOWN LEFT RIGHT MUTE TURN ON / OFF AUDIO CH UP CHANNEL UP CH DOWN CHANNEL DOWN VOL UP VOLUME UP VOL DOWN VOLUME DOWN SWAP CHANGE SCREEN IF YOU SEE TWO WINDOW ON DTV PICTURE IN PICTURE...
Page 6
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc.