Two Hour Unattended Operation; Paper, Toner, And Waste Toner Replacement; Optimum Monthly Print/Copy Volume - Canon imagePRESS C7000VP Customer Expectation Document

14.2 Two Hour Unattended Operation

The imagePRESS C7000VP was designed for true production environments. With
its new productivity and reliability enhancements and technologies, the digital
press can run up to two hours with no operator intervention. Before beginning an
unattended run, the operator should check the following conditions:
1. The paper decks must be full (2-POD decks, 2-High Capacity Stackers; any
paper weight)
2. Toner coverage area averages 10% for each color
3. Toner bottle can be empty, but hopper must be full
4. Both stackers are empty
Any simplex or duplex job may be produced without any operator intervention
during the two hours. In fact, if you are running a two-sided job on LTR paper (or
any larger size paper), only one POD Deck and one High Capacity Stacker is
required.

14.3 Paper, Toner, and Waste Toner Replacement

The imagePRESS operator can maintain productivity by removing, replacing, and
refilling the paper, toner, and waste toner while the press is running.
The paper trays can also be opened and refilled during operation. The tray that is
being utilized by the press during production, however, will be locked. Once the job
completes, or the machine switches to another tray, the empty tray unlocks,
allowing the operator to prepare for the next job, and add more paper. No
productivity is affected and jobs finish quicker.
Similar to the paper, the toner bottle may be removed and replaced while a job is
printing. The imagePRESS C7000VP has a large toner hopper, making it possible
for the press to run much longer with no bottle. The operator is not required to
replace the bottle immediately after removing the old bottle. Therefore, productivity
and image quality are not affected, and jobs finish in the same amount of time.
Finally, the waste toner bottle is required to be replaced when filled. However, this
bottle may be removed while the press is running. Therefore, the operator will
remain productive, and not notice any changes in speed or quality.

15. Optimum Monthly Print/Copy Volume

The optimum monthly print/copy volume is 70,000 – 300,000 impressions per
month. This is the print/copy volume range that the equipment was intended to run
on a regular basis to maintain a high level of performance and print/copy quality.
Running the equipment within this range ensures that no undue stress is placed on
components, and it allows time for the proper servicing and maintenance of the
equipment.
Version 7 imagePRESS C7000VP Customer Expectations Document Page 42