Kenwood NEXEDGE NX-200 Instruction Manual page 19

NX-200/300/200G/300G/205G/305G
a Selector knob
Rotate to select a zone or channel/group ID (default).
b Power switch/ Volume control
Rotate to turn the transceiver ON/OFF and to adjust the volume.
c Auxiliary key
Press to activate its programmable function {page 10}.
d Transmit/ Receive/ Battery low indicator
If enabled by your dealer, lights red while transmitting,
green while receiving a call (Conventional channels only),
and orange when receiving an optional signaling call
(2-tone, DTMF signaling, etc.). Blinks red when the battery
power is low while transmitting.
e PTT (Push-To-Talk) switch
Press and hold this switch, then speak into the microphone
to call a station.
f Side 1 key
Press to activate its programmable function {page 10}. The
default is Squelch Off Momentary.
g Side 2 key
Press to activate its programmable function {page 10}. The
default is Backlight.
5