Table of Contents
Advertisement
6-3.Internal wiring instructions (photos to be provided after production)
1.
The two power supply wiring of the pulse generator are red-wire battery box positive electrode
and black-wire battery box negative electrode respectively.
2.
The ignition needle of the left and right burner is firmly connected with the left and right terminals of
the pulser respectively.
3.
The black wire of the pulser is the grounding terminal line (shown in Fig.), and is fixed with the valve
body through screws.
4.
The yellow line of the pulser is 4.8 inserted and connected with the left ignition micro switch.
5.
The pulser green line 4.8 inserts the right ignition micro switch.
6.
The thermocouple silver thread is fixed to the valve body by screws.
The whole wiring diagram is shown in figure above
●
18
Advertisement
Table of Contents
