Mitsubishi Electric EHPT20Q-VM2EA Service Manual page 55

DISASSEMBLY PROCEDURE
5-3. How to remove the thermistor THW5A,THW5B
(1) Remove the front, right, left, and rear panels. (Photo
5-6) (Refer to section 6-1 and 6-2)
(2) Remove all tapes securing the insulation first, then
remove two sheets of insulation around the tank.
(Photo 5-7, Photo 5-8, and Photo 5-9）
< CAUTION(1) >
Take care NOT to break the plastic bag covering the
insulation when removing the tapes securing the
insulation. If the plastic bag is broken, repair with tape
or other materials.
GCH15010
PHOTOS
Photo 5-6
Removal of the front,
right, left, and rear panels.
Photo 5-8
Second layer of insulation (inside)
First layer of insulation (outside)
Photo 5-9
55
Photo 5-7
Tape
First layer of insulation
(outside)
First layer of
insulation (outside)
Tape
Second layer of
insulation (inside)