Yamaha 6YC INFORMATION STATION Operation Manual page 14

Initial Setting
7. Fill the fuel tank to 25% of its capacity
with fuel.
TIP:
• The quantity displayed on the screen is
25% of the tank capacity.
• An error message will appear and calibra-
tion will abort if the fuel tank sensor resist-
ance value is different from that of the
calibration point. Check the fuel quantity in
the fuel tank.
8. Wait 5 seconds after filling the fuel tank
with fuel, and then press the [SET] but-
ton.
9. A confirmation screen will appear. Press
the [SET] button to confirm and proceed
with calibration step 2.
10. Fill the fuel tank to 50% of its capacity
with fuel.
11. Wait 5 seconds after filling the fuel tank
with fuel, and then press the [SET] but-
ton.
12. A confirmation screen will appear. Press
the [SET] button to confirm and proceed
with calibration step 3.
9
13. Fill the fuel tank to 75% of its capacity
with fuel.
14. Wait 5 seconds after filling the fuel tank
with fuel, and then press the [SET] but-
ton.
15. A confirmation screen will appear. Press
the [SET] button to confirm and proceed
with calibration step 4.
16. Fill the fuel tank to 100% of its capacity
with fuel.
17. Wait 5 seconds after filling the fuel tank
with fuel, and then press the [SET] but-
ton.
18. A confirmation screen will appear. Press
the [SET] button to confirm and proceed
with calibration step 5.
19. The fuel tank sensor calibration is com-
plete. Press the [SET] button.