Bosch Rexroth HD 2/H Assembly Instructions Manual page 4

4/56
Bosch Rexroth AG, MIT: HD 2/H, 3 842 358 796/2015-01
8 Starting up
8.1 First-time operation
8.2 Further risks
8.3 Re-commissioning after a standstill period
8.4 Check and adjust the rotation angle of the lift rotate unit
8.5 Adjust stroke, lift and rotate speed
8.6 Reduce stroke over conveyor level
8.7 Example for guard to be provided by the customer
9 Operation
9.1 Notices regarding operation
9.1.1 Wear
9.1.2 Measures to minimize wear
9.1.3 Loading the workpiece carrier
9.1.4 Permitted center of gravity on the workpiece carrier
9.1.5 Environmental infl uences
10 Maintenance and repair
10.1 Cleaning and care
10.2 Inspection
10.3 Maintenance
10.4 Replacement of worn parts
10.4.1 Replace the pressure point of the fi ngers in the rotary table
(only sizes 1 and 2).
10.4.2 Replace damper for rotary table
10.4.3 Spare parts
11 Decommissioning
12 Disassembly and replacement
12.1 Preparing the product for storage/re-use
13 Disposal
14 Extension and modifi cation
15 Troubleshooting
16 Technical data
16.1 Mass moment of inertia
16.2 Ambient conditions
16.3 Pneumatics
34
34
36
37
37
38
39
40
41
41
41
41
41
42
42
44
44
45
46
47
47
48
49
49
49
49
50
50
50
51
51
54
54