Returning To Normal Display - Panasonic HDMI SA-XR70E Service Manual

EFFECT CD/COAX2
STEREO TV/OPT1
PL2 DVD/COAX1
SFC DVR/VCR1/OPT
TEST No change
-/L CD/COAX2
+/R CD/COAX2
5. After enter the remote control code "DIRECT(TUNING)", the message "_ _ _OK_ _ _" will appear for 0.25 second when each
button is pressed one by one.
6. When "POWER" button is pressed or " CHECKER COMMAND" code of remote control is received, quit this mode and turn off
power then will initialize all setting of RAM. If the power failure are detected it willinitialize all RAM.
9.5.

Returning to Normal Display

Press the POWER button on the unit to exit the function. The power is turned off.
STEREO
STEREO
STEREO
STEREO
2
SURROUND Scan the test noise output channel with 500ms
intervals
STEREO Balance is set to leftmost
STEREO Balance is set to rightmost
-
-
-
-
21
SA-XR70E / SA-XR70EB / SA-XR70EG
-48dB/0dB
-48dB/0dB
-48dB/0dB
-48dB/0dB
-18dB/0dB
-18dB/0dB
-18dB/0dB