Select The Power Cables; Ensure The Cooling; Protect The Drive And Input Power Cable; Install The Drive On The Wall - ABB ACQ580-01 Quick Installation And Start-Up Manual

Hide thumbs Also See for ACQ580-01:

Table of Contents

Available languages

12 EN – R6...R9 Quick installation guide

For information on reforming the capacitors, see Converter module capacitor

reforming instructions (3BFE64059629 [English]), available on the Internet at

www.abb.com/drives/documents.

Select the power cables

R0-

Size the power cables according to local regulations to carry the nominal current

given on the type designation label of your drive.

R6-

R6-

See table

on page

operating temperature range of the drive is -15 to +50 °C (+5 to +122 °F). No

condensation or frost is allowed. For more information on the ambient temperature

and derating, see chapter Technical data in ACQ580-01 (0.75 to 250 kW) hardware

manual (3AXD50000035866 [English]).

See tables III,

If you use gG fuses, make sure that the operating time of the fuse is below

0.5 seconds. Follow the local regulations.

Warning! The drive module is heavy (42 to 103 kg / 93 to 227 lb). Use a

suitable lifting device. Do not lift the module manually. Make sure that the wall

and the fixing devices can carry the weight.

See figure

R6...R9 Figures A

(UL: table

on page 9) for the heat dissipation. The allowed

and

on page

for the fuses.

on page 83.

Table of Contents