D-Link DCS-56 Quick Installation Manual page 5

STEP 5: Install the camera enclosure onto the mount bracket and secure the joint with the
screws provided.
STEP 6: Adjust the screws accordingly below the camera enclosure to control the camera
position.
STEP 7: To install the wireless antennas (DCS-56W only), connect the wireless antennas
to the camera enclosure, then attach the antenna holders to the enclosure, and tighten
them in place.
D-Link DCS-56 Series Quick Install Guide
This screw controls the
level position adjustment
(<360°).
This screw controls
the vertical position
adjustment (<180°).
5