Rinse Aid; External Dispensing - Miele PFD 101 Operating Instructions Manual

Rinse aid

You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse aid amount dispensed can
turn out to be higher than the set value
due to an automatic adjustment of the
programme.
If spots appear on crockery and
glassware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
- Decrease the rinse aid dosage.

External dispensing

Activate automatic dispensing of liquid
detergent if you have installed the
optional external dispensing module.
The DOS module is supplied with its
own installation instructions.
 Select the setting you want and
confirm with OK.
The setting will remain active until
you deactivate "External dispensing".
Detergent quantity
The following functions will only
become visible when external
dispensing has been activated.
A detergent amount of 0.50% is set as
standard. The dispensed quantity can
be modified between 0.1 and 2.00% in
increments of 0.05%.
Settings 
99