Download Print this page
Sealey LED317 Quick Start Manual
Sealey LED317 Quick Start Manual

Sealey LED317 Quick Start Manual

Rechargeable 3w cob + 3w led inspection lamp

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
1.1.
GENERAL SAFETY
Ensure the lamp is fully charged before initial use.
9
DO NOT turn the lamp on when it is being charged.
8
DO NOT shine directly into your, another person's or an animal's eyes.
8
DO NOT allow children to use the lamp.
8
DO NOT handle or move the lamp whilst it is being charged.
8
DO NOT use the lamp if you suspect that the battery or the lamp casing is damaged.
8
DO NOT leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently
8
recharge the battery at least once every six months of non-use.
1.2.
BATTERY SAFETY
WARNING! To reduce the risk of burns or fire:
DO NOT attempt to open, disassemble, modify or service the battery pack.
8
DO NOT crush, puncture, short external contacts or dispose of in fire or water.
8
DO NOT expose to temperatures above 60°C (140°F).
8
Recycle or dispose of used battery as stipulated by local regulation.
9
If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool
9
water and seek immediate medical attention.
2.
INTRODUCTION
i
Mini, lightweight lamp. 3W COB lamp produces up to 250 lumens. 3W LED Torch produces up to 100 lumens. Integral hanging
hook and belt clip. Magnetic base which can rotate 180°. Battery level indicator. Rechargeable 3.7V 1.2Ah Li-ion battery. Operating Time:
3hr. Micro USB charging port. Supplied with USB cable.
3.
SPECIFICATION
i
Model No: ................................................................. LED317
Battery .......................................................3.7V 1.2 Ah Li-ion
Charging Time ................................................................2.5hr
IP Rating ........................................................................ IPX4
LED Qty ........................................................ 1 COB + 1 LED
Length ........................................................................ 155mm
Lumen Outputs ................................................... 250 / 100lm
Operating time ..................................................................3hr
Net Weight .................................................................. 1.32kg
IMPORTANT WARRANTY INFORMATION
The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time.
We will provide warranty against mechanical and electrical defect for a period of one year - this DOES NOT cover fair wear and tear.
If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances
we will not replace the battery regardless of whether it is less than one year old.
© Jack Sealey Limited
RECHARGEABLE 3W COB + 3W LED
INSPECTION LAMP
LED317
MODEL NO:
Original Language Version
LED317
Issue 1
30/05/18

Advertisement

loading

Summary of Contents for Sealey LED317

  • Page 1 LED317 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd’s Batteries Producer Registration Number (BPRN) is BPRN00705.