Advertisement
Quick Links
Advertisement
Related Manuals for Dell S3220DGF
Summary of Contents for Dell S3220DGF
- Page 1 31.5" LCD Monitor Dell S3220DGS Service Service Service Simplified...
- Page 2 Accordingly, a servicer who uses a service procedure or tool which is not recommended by DELL must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected.
- Page 3 1. Exploded view diagram with list of items...
- Page 4 STAND_BUTTON Latch MAINFRAME BEZEL_BTM BKT_LOCKER Part No. Description Q’ty SPRING 0M1G3030 4120 SCREW 3 4(MIDDLEFRAME/PANEL) LOGO DELL 0M1G3030 4120 SCREW 3 4(MIDDLEFRAME/PANEL) TAPE_ACETATE Q01G6019 1 SCREW（MIDDLE FRAME/KEY BOARD) INSULATING SHEET 0D1G1030 6120 SCREW D3 6(MAIN BOARD/POWER BOARD/MAINFRAME) STANDASS'Y QM1G38400601200ARA SCREW -- 6mm(POWER BOARD/MAINFRAME) BASE_ASS’Y...
- Page 5 2. Wiring connectivity diagram...
- Page 6 3. Mechanical Instruction Tools Required List the type and size of the tools that would typically can be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description: - Phillip head Screwdriver - Hex Screwdriver - Penknife...
- Page 7 3.1 Disassembly Procedures: Step Figure Remark Turn off power, S1.Before Unplug external cables disassemble from product S2.Remove the STAND-BASE ASS’Y Use a Philips-head screwdriver to remove 4 screws for unlocking mechanisms (No.1~4 screw size=M4x10; Torque: 12±2kgf.cm) S3.Remove the REAR COVER Use Penknife to...
- Page 8 separate the bezel and rear cove follow the arrows in sequence, then you can take out rear cover. Tear off the aluminum foils and Disconnect the cables S4. Remove the main frame Use a Philips-head screwdriver to remove 3 screws for unlocking the mainframe (No.1~3 Screw size=M3x4, Torque: 3±0.5kgf.cm)
- Page 9 Remove the Mylar. Use a Philips-head screwdriver to remove 4 screws for unlocking the main board and the adapter board (No.1~8 screw size=D3x6, S5.Remove main board and power Torque: 6±1kgf.cm) board (No.9 screw size=M4x6, Torque: 6±1kgf.cm) Disconnect all of the cables...
- Page 10 Use a Philips-head screwdriver to remove 20 screws for unlocking the middle plastic bezel with the whole unit, and then remove the middle plastic bezel carefully. (No.1~20 screw S6.Remove the size=M3x4, bezel and panel Torque=3±0.5kgfxcm) Use a Philips-head screwdriver to remove 5 screws for unlocking the BEZEL_BTM and the Panel.
- Page 11 3.2 Assembly Procedures: Step Figure Remark Use a Philips-head screwdriver to tighten 4 screws for locking the S1.Assembly the Key board Key board (No.1~4 screw size=Q2x2.5, Torque=0.9±0.4kgf.cm) Connect the cables of the USB board Use a Philips-head screwdriver to screw 1 S2.Assembly the USB BOARD screw for locking the...
- Page 12 Connect all of the cables Use a Philips-head screwdriver to screw 4 screws for locking the main board and the adapter board (No.1~8 screw size=D3x6, Torque: 6±1kgf.cm) (No.9 screw size=M4x6, Torque: 6±1kgf.cm) Paste the Mylar. Use a Philips-head screwdriver to screw 3 screws for locking the S5.
- Page 13 Connect the cables Paste the aluminum foils Use a Philips-head screwdriver to screw 4 screws for locking Rear S6.Assembly the cover Rear cover (No.1~4 screw size=M4x10; Torque: 12±2kgf.cm)
- Page 14 S7.Assembly the Stand...
- Page 15 4. Trouble shooting instructions...