Agency Approval Marks - Honeywell 51306533 User Manual

Agency approval marks

The following table describes the agency approval for the Honeywell's OneWireless
FDAP.
Symbol
R200 OneWireless Field Device Access Point User's Guide
October 2010
2.1. Compliance statements and restrictions
The National Electrical Manufacturers Association (NEMA) mark
means the enclosures are intended for use in indoors or
outdoors to protect the enclosed equipment against splashing
water, seepage of water, failing or hose directed water, and
severe external condensation.
Type 4X and IP66
®
The Factory Mutual Approval mark means the equipment has
been rigorously tested and certified to be reliable.
Class I, Division 1, Groups C & D
Class I, Division 2, Groups A, B, C & D
Class I, Zone 2, Ex nA IIC
The Canadian Standards mark means the equipment has been
tested and meets applicable standards for safety and/or
performance.
Class I, Division 1, Groups C & D
Class I, Division 2, Groups A, B, C & D
Class I, Zone 2, Ex nA IIC
The conformité européenne (CE) mark means that radio
equipment used in the European Union is in accordance with the
R&TTE Directive. The CE Mark and the notified body (NB)
identification number are used when the NB is involved in the
conformity assessment procedure. The alert sign must be used
when a restriction on use (output power limit by a country at
certain frequencies) applies to the equipment and must follow the
CE marking.
R&TTE Directive 1999/5/EC
EMC Directive 2004/108/EC
LVD Directive 73/23/EEC
GP design guidelines EN 61010-1,
Honeywell Confidential & Proprietary
2. Agency Compliance Information
Description
19